Access Control Biometrics

ΣΥΣΤΗΜΑΤΑ ΕΛΕΓΧΟΥ ΚΑΙ ΠΡΟΣΒΑΣΗΣ

PROMI1000PC

CDVI

STAND ALONE ACCESS CONTROL

PROMI1000PC

ONE-DOOR CONTROLLER - LAN NETWORK (LOCAL IP)

  Installation manual - PDF
  • Free software.
  • On-board keypad and reader.
  • IP connection with BTCPIP (Optional).
  • 2 relays.
  • Self-contained electronics.
  • 1000 events stored in memory buffer.
  • Schedule for operating mode (Card, Card & PIN, Card/PIN).
  • 1000 proximity tags and 1000 user codes.
  • Bank holiday management (up to 16 dates).
  • Anti-passback.
  • PC connection.
  • Tamper switch.
  • 3 operating modes:
    - Card + PIN (double security),
    - Card only,
    - Card or PIN.
  • Audible and visual feedback.
  • Dimensions (L x W x D): 145 x 80 x 28mm.
  • Date and time backed up by 3 V CR1225 button cell.
  • Bank holiday management (up to 16 dates).
  • Date and time management.
  • Snap-off E2PROM memory unit containing the tags, codes and events.
  • An auxiliary reader can be installed remotely up to 50m.
  • 1 input: exit push button + 1 input: alarm contact.
  • 1 opening relay with 1 RT 3A/125 V~ switch.
  • 1 alarm relay with 1 RT 3A/125 V~ switch.
  • Master code programmable on 5 digit code lengh.
  • A door status switch controls the alarm.
  • Input voltage: 12V ac/dc.
  • Consumption: 300mA.
  • IP 53.
  • -10°C to +70°C.

PROMI500

PROMI500

Stand-alone Controller

  • 1-door + Proximity card reader.
  • 2 relays outputs.
  • 500 proximity tags and 500 user codes.
  • Self-contained electronics.
  • Tamper switch.
  • 3 operating modes:
    - Card + PIN (double security),
    - Card only,
    - Card or PIN.
  • Audible and visual feedback (buzzer & LED).
  • Dimensions (L x W x D): 145 x 80 x 28mm.
  • Material: ABS.
  • 12-key keypad + proximity reader.
  • 1 master code 5 digits.
  • Output: 2 relays NO/NC contacts 3A/125V ac one of which is to open the door and one to report the alarm.
  • Programmable relay output (1 to 99 seconds).
  • Optional: 1 auxiliary reader remotely installed up to 50m.
  • E2PROM memory.
  • 1 door contact input (open or closed).
  • 12V ac/dc power supply.
  • Consumption: 250mA.
  • IP 53.
  • -10°C to +70°C.
Complies with European R&TTE directive 99/5/EC and harmonised standards: ETS 301 489 and ETS 300-330-1-Ed 2001. Compliant with applicable EMC standards: EN 50133, EN 50130-4.

DGID

DGID

Stand-alone fingerprint reader

  • Free software.
  • Up to 400 fingerprints.
  • Self-cleaning sensor.
  • Swipe finger method.
  • Auto detect finger.
  • Can recognise one or several fingers per user.
  • Operates on a PC platform.
  • Available in Wiegand version: DGIDW.
  • Dimensions (L x W x D): 120 x 120 x 57mm.
  • Flush mount dimensions (L x W x D): 80 x 80 x 45mm.
  • Dimensions of the surface mount housing (L x W x D): 126.5 x 131 x 70mm.
  • Self-cleaning sensor.
  • Operation with wet fingers (choice of one or several fingers during registration).
  • 1 RCT relay, door opening.
  • 1 tamper switch on the front panel.
  • Memorises up to 400 fingerprints.
  • Delivered with software on CD-ROM which can run tests to become familiar with the system prior to installation on site.
  • Compatible with Windows 2000, XP Vista and 7 operating systems.
  • 1 relay switch RCT 3A/30 DC.
  • 1 indoor request-to-exit input.
  • Input voltage: 12V ac/dc.
  • Consumption: 300mA.
  • IP 53.
  • -10°C to +70°C.

DGM4

DGM4                Installation manual PDF

4-Door controller and Mifare® reader

 

 

 

 

  • Compliant with Mifare® (system compatible with all Mifare® tag brands).
  • TDG4 reader: Very high resistance to flames.
  • Tag programming without travelling to the site.
  • Access history (Residents).
  • Standalone system (no PC connection required).
  • Networking of 5 controllers (management of 20 doors) on 1 RS485 bus.
  • Compatible with DGM1 via PCV123.
  • Possibility of erasing the tags to reprogram them.
  • Wireless programming of resident tags.
  • Information downloads via TDG4.
  • Snap-off terminal blocks.
  • Schedule management (residents).
  • Anti-passback.
  • Tags with hierarchic loss and access index.
  • 80 pass tags (240 doors per pass tag).
  • Dimensions (L x W x D): 140 x 180 x 65mm.
  • Reading/writing controller.
  • 4-door management: 4 NO/NC relays, 4 exit push button inputs, up to 4 reading units.
  • Management of 20,000 resident tags User rights on the tag.
  • 3000 events memorised.
  • Anti-passback function.
  • 1 NO/NC alarm output: door forced or left open.
  • Automatic tag replacement.
  • Input voltage: 12V dc.
  • Consumption: 500mA (Readers + controller).
  • IP 52.
  • -20°C to +70°C.
DGM1

DGM1

1-Door controller and Mifare® reader

 Installation manual PDF

 

 

  •  Compliant with Mifare®.
  • Up to 100 doors on the same site:
  • Capability to program 100 DGM1 from 1 to 100 + gate access.
  • Customisable access level when adding a tag: 1 door + gate.
  • Easy to program: add tag via PC, PCV123 or with the master card, DGM1 configuration done with the PCV123.
  • Unlimited number of users.
  • Low cost.
  • Possibility of erasing the tags to reprogram them.
  • Tag and master card deleted with the PCV123.
  • Snap-off terminal blocks.

ONLINE ACCESS SYSTEMS
CTV900A

CENTAUR® - CTV900A

2 Door Controller

Installation manual -PDF

 

 

  • Controls 2 doors/2 readers.
  • Up to 6 additional doors with the CTV900A using 3 CAA470A expansion modules.
  • 10,920 on-board card database.
  • 256 schedules, 256 access levels.
  • 2048 events.
  • 16 on-board inputs.
  • 2 on-board 12V dc or 24V dc field-selectable lock outputs.
  • 2 on-board Form “C” dry-contact relay outputs (NO/NC).
  • Fully distributed database architecture (access decision made locally).
  • Flash firmware - Upload fimware via the computer.
  • Supports common Wiegand, Track 2 ABA (magnetic stripe) and BCD (keypad) communication formats.
  • Snap-off terminal blocks.
  • Battery back-up functionality (2 X 12 Volts 7AH gel battery).
  • Quick and easy card programming (CMPP module).
  • Status indicators.
  • RS-485 controller-to-controller (max. 1220m.)
  • E-Bus for the expansion modules (max. 1220m.)
  • RS485/RS-232 port enabling for communication with the software via serial port, dial-up or LAN/WAN (TCP/IP).
  • Controlled lift: 2 cabs with 64 floors per CTV900A; Schedule per floor; 128 Floor groups.
  • Reader or keypad inputs: 2.
  • Multi-purpose inputs: 16 (using ATZ 2R/3R).
  • Two lock outputs, 12/24V dc.
  • Two Form “C” dry-contact relays, 5A. 30V dc NO/NC.
  • 6 PGM 50mA outputs with transistor (collector open).
  • Input voltage: Transformer: 24V ac - 75VA (TR24/75) or higher, 50/60 Hz.
  • Supply current: 2.5A maximum.
  • Battery capacity: 2 x 12V dc, 7 Ah.
  • Combined maximum currents:
    - 24V/1.3A,
    - 12V/1A,
    - 5V/0.18A.
  • 5°C to +55°C.
  • IP 20.
DOOR AUTOMATION

DWPS10

DWPS10

Single door Automation

 Installation manual -PDF

 

 

  • Universal arm (Inward/outward).
  • Multilingual LCD display.
  • Indoor mounting.
  • Programming tag supplied.
  • Suitable for existing doors:
    - inward or outward opening,
    - with "fail safe" or "fail secure" locking,
    - right or left handed.
  • Fast operation: Opening/closing in 3 seconds.
  • Up to 120 Kg door weight.
  • Maximum door width: 1200mm.
  • Wind stop function.
  • Push & Go function.
  • Adjustable opening, pause and closing times.
  • Day/night selection.
  • Operating modes: Door Free, Automatic, Held open.
  • Built-in RF receiver.
  • Self learning set-up and reset.
  • Obstacle detection (adjustable cycles).
  • Built-in battery back-up: 12V dc 1.3Ah.

SEL2641R433K8P

 

SEL2641R433K8P

800 users Controller

 SEL2641R433K8P PCCOM - Software -PDF

 

 

  •  Frequency: 433.92 MHz.

  • 2 relays.
  • Multi-user stand-alone controller for application: car parks, garages,…
  • 800 users.
  • 2 security levels: Administrator and standard user.
  • Available with Windows XP and Vista sofware.
  • Adjustable time output.
433 Mhz RF Transmitters

SENSRAD

SENSRAD

RF sensitive contact - 1 channel

Installation manual -  PDF

 

 

  • A simple touch activates the RF communication.
  • Easy installation: no wiring (Works with 3V battery).
  • Audible feedback.
  • Frequency: 433.92 MHz.
  • Range: Up to 150m.

DTRR1434R

DTRR1434R

Long range reader + active card

Installation manual -PDF

 

 

  • STAND-ALONE READER.
  • Adjustable range: Up to 15m.
  • Simultaneous reading of 20 tags maximum.
  • Frequency: 433.92 MHz.
  • Built-in antenna.
  • Audible and visual feedback.
  • Available in versions:
    - Wiegand 26 bits (Ref: DTRR1434),
    - Dual-technology RF + Proximity or RF + Mifare®.
CP2

CP2

125 kHz proximity card

 

 

 

  • PVC.
  • Thickness: 0,8mm.
  • Optional: Black & white or colour customisable printing.

CPE

CPE

125 kHz proximity card

 

 

 

  • PVC.
  • Key fob.
  • Thickness: 1,8mm.
BV

BV

Mifare® card, 13.56 MHz

 

 

 

  • PVC.
  • Thickness: 0,8mm.
  • Optional: Black & white or colour customizable printing.

RF Cards (dual technology)

DTXT5434

DTXT5434

Active card

 Installation manual -PDF

 

 

  • Active card.
  • Frequency: 433.92 MHz.
  • Modulation: FSK,
  • Replaceable CR2032 lithium battery.
  • Motion sensor activation: DTXT5434M, DTXT5434MP and DTXT5434MMI.
  • Dual-technologies:
    - RF/Proximity (DTXT5434P, DTXT5434MP),
    - RF/Mifare® (DTXT5434MI, DTXT5434MMI).
  • Option: card holder (CLIPDIGITAGLR).

Proximity TAGS

METAL1

METAL1

125 kHz proximity tag

 

 

 

 

  • Metal.
  • Sealed.
  • Resistant.
  • Key fob.
  • Optional: Engraving.
PPCG

PPCG

125 kHz proximity tag

 

 

 

  • Polycarbonate.
  • Key fob.
  • Colour: Grey (Available in blue - Ref PPCB).


PP

 

 

PP

125 kHz proximity tag

 

 

 

  • Polycarbonate.
  • Key fob.